







VERMEER BC200
- Stock: Pre-Order
- Product code: BC200
0.00€
Ex Tax: 0.00€

Two-step start and ease of operation
A two-step, turnkey starting process takes operators
from
startup to chipping in moments. An infeed button
and switch
control allow for ease of operation, and an
offset roller makes
it efficient to feed the machine.
That’s a good thing, given that
the powerful pulling
capacity and oversized infeed opening
will keep your
crew wanting to feed it more and more. Plus,
the
SmartFeed system monitors engine speed and stops or
reverses the rollers if needed. This is chipping simplicity

An EU Stage V electrical-controlled Kubota engine delivers
57 hp (42.5 kW) and best-in-class fuel capacity while
meeting
EN 13525:2020 safety and emission standards.
The Ecoldle
system is adjustable, saves fuel and reduces
noise by
automatically reducing engine speed after one
or five
minutes of inactivity.

Fewer doors mean more convenience. A one-piece
pivoting
engine hood provides optimal accessibility
to internal
components for ease of serviceability including
chipper knives,
anvil and grease points. This machine was
designed to put
wear parts well within reach

From the paint to the undercarriage, this brush chipper
is
equipped for the long haul. An axle capacity of 1.800 kg
(3.968 lb) provides stability and durability during chipping
and
transport — particularly on bumpy road conditions.
And the
four-stage powder coating treatment helps
protect the machine
against time and weather — it will
still look good long after it
has chipped thousands of
limbs and branches.
BC200 BRUSH CHIPPER
GENERAL DIMENSIONS AND WEIGHTS
Length — feed table up, tongue in: 377 cm (148,4 in)
Length — table down, tongue extended: 435 cm (171,3 in)
Max width (operation): 157 cm (61,8 in)
Max height (operation): 251 cm (99 in)
Weight: 1.465 kg (3.230 lb)
Tongue weight: 80 kg (176 lb)
ENGINE
Make and model: Kubota WG1605
Max gross horsepower: 57 hp (42,5 kW)
Fuel tank capacity: 39,5 L (10,5 gal)
Max fuel consumption: 7 L/hr (1,8 gph)
Fuel type: Unleaded gasoline 95 octane max 10% methanol
Max angle of continuous operation: 30°
Clutch type: Direct drive
FEED SYSTEM
Infeed roller dimension (1): 40 cm (15,8 in)
Infeed roller dimension (2): 26 cm (10,2 in)
Roller clamp force: 396 kg (873 lb) spring loaded
Infeed opening: 20.3 cm x 30.5 cm (8 in x 12 in)
Infeed table width: 114 cm (44,9 in)
Infeed table length: 70 cm (27,6 in)
Infeed hopper height: 79 cm (31,1 in)
HYDRAULIC SYSTEM
Tank capacity: 22,7 L (6 gal)
Biodegradable oil: Optional
OTHER OPTIONS
Special paint: Available
SHIPPING METHODS
Shipments of our products are made ALL OVER GREECE. Shipments are made via ELTA Door-to-Door or General Post. Shipping costs depend on total weight, package volume & destination. The cost calculation is done automatically when sending your order.
The minimum shipping cost is:
- ELTA Door-Door: € 5.30 up to 5 kg and € 1 / kg for each additional kg.
- General Post: € 6.50 up to 5 kg and € 1 / kg for each additional kg.
We also provide FREE SHIPPING FOR ORDERS> 300 € within Greece.
For more information please contact us, to offer you the cheapest possible solution.
PAYMENT METHODS
Payment upon delivery (COD)You pay upon delivery of the order at your place and pay the full amount in cash.
Payment by Deposit
You can deposit the amount of your order in one of the bank accounts of our company:
NATIONAL BANK ACCOUNT
Α/Λ – 164/017612-55
IBAN – GR06 0110 1640 0000 1640 1761 255
BIC – ETHNGRAA
PIRAEUS BANK ACCOUNT
Α/Λ – 5027-114316-800
IBAN – GR50 0172 0270 0050 2711 4316 800
BIC – PIRBGRAA
Beneficiary: ERGOTRACTION ΕΤΕΡΟΡΡΥΘΜΗ ΕΤΑΙΡΕΙΑ