ELECTRIC POWERED.
Brush chipper created for
stationary applications and for users who demand
an organic waste reduction option that helps
reduce fuel emission issues.
THE CONTROL PANEL.Fully weatherproof and contains a Siemens soft
starter which helps protect the drum motor from
overloading and voltage dips from the power grid.
THE PATENTED SMARTFEED SYSTEM.Maximizes operator productivity while
reducing strain on vital equipment components.
The feed-sensing control system monitors motor
current and automatically stops or reverses the
feed when feeding large, hardwood material.
BUILT WITH OPERATOR SAFETY IN MIND.Through the patented bottom-stop feed bar
which is located along the bottom of the feed
table. This system makes it possible for an
operator to strike the bar and shut off the feed
mechanism. Dual reset/hold-to-run buttons allow
the operator readily reset the bottom-stop
feed bar.
DANFOSS ELECTRIC MOTORS.The BC1000E features two Danfoss induction
electric motors. A 55 kW (73.8 hp) powers the drum
while the 3 kW (4 hp) runs the infeed roller via
hydraulic circuit. Both the drum and rollers are
IP55-certified and enclosed by an all-steel hood,
helping protect them from weather and worksite
conditions.
A LARGE RECTANGULAR 12 IN X 17IN (30.5 CM X 43.2 CM) FEED OPENING.
Helps with productivity by reducing the
need to trim material before feeding it i
nto the chipper.
BC1000E BRUSH CHIPPER
GENERAL
Length (feed table down, tongue extended): 140 in (355.6 cm)
Width: 67 in (170.2 cm)
Height: 98 in (250 cm)
Weight: 4,409 lbs (2,000 kg)
ELECTRIC DRUM MOTOR
Power: 73.8 hp (55 kW)
Voltage: 380 v
Phase: 3
Enclosure: IP55
Full load amps: 103
Full load rpm: 1,480 rpm
ELECTRIC INFEED ROLLER MOTOR
Power: 4 hp (3 kW)
Voltage: 380 v
Phase: 3
Enclosure: IP55
Full load amps: 6
Full load rpm: 3,460 rpm
FEED SYSTEM
Feed roller dimensions: 20 in x 17 in (50.8 cm x 43.2 cm)
Feed roller orientation: Single horizontal
Feed speed: 105 ft/min (32 m/min)
Infeed table width: 56 in (143 cm)
Infeed table length :31 in (80 cm)
Infeed throat capacity: 12 in x 17 in (30.5 cm x 43.2 cm)
SAFETY SYSTEM
Bottom-feed stop bar: Standard
Reset method: Dual green hold-to-run buttons
Positions: Four positions – E-stop, forward, stop, reverse
CUTTING SYSTEM
Material capacity: 12 in (30.5 cm)
Width: 20 in (50.8 cm)
Diameter: 22 in (56 cm)
Speed: 1,997 rpm
Number of knives: 2
Useable edges: 2 reversible
DISCHARGE SYSTEM
Chute height: 94 in (238 cm)
Chute rotation angle: 270˚
Rotation type: Manual
ELECTRICAL SYSTEM
System voltage: 12
Battery: 31-950T, 850 CCA
Switches: Hold-to-run, sensitivity selector
