Menu
Your Cart

VERMEER SC70TX

  OPERATOR PRESENCE SYSTEM.
  This operator system is intended to help protect the
  operator. If the operator’s hand(s) leave the cutter
  wheel controls for more than one second, the cutter
  wheel will disengage, come to a stop and the
  cutter wheel indicator light will go out



  TRACTIVE EFFORTS.
  The SC70TX is equipped with an increased ground
  drive speed and is designed  with a track to help
  decrease ground disturbance.





  PRODUCTIVE CHIPPING.
  With a 67 hp (50 kW) Cat C2.2L turbocharged Tier
  4 Final/Stage V diesel engine, this machine is ready
  for tough cutting jobs.





  PATENTED SMARTSWEEPTM CONTROL SYSTEM.
  The patented SmartSweep control system monitors
  engine speed and automatically adjusts cutter wheel
  sweep rate to maximize power to the cutter wheel
  while reducing engine stress. 




  OPTIONAL REMOTE CONTROL.
  An optional remote control allows operators to
  maneuver the stump cutter while away from
  the unit.





  YELLOW JACKETTM CUTTER SYSTEM.
  The Vermeer-exclusive Yellow Jacket cutter
  system is designed to provide effi cient
  serviceability, as well as to help extend pocket
  and tooth life. 






SC70TX STUMP CUTTER

GENERAL
Length: 141.6 in (359.6 cm)
Width: 51 in (129.5 cm)
Height: 72 in (182.8 cm)
Weight: 3900 lbs (1769 kg)

ENGINE
Make and model: Cat C2.2 turbocharged Tier 4 final/Stage V Diesel
Number of cylinders: 4
Max gross horsepower: 67 hp (49.9 kW)
Max torque: 153 ft-lb (207.4 Nm)
Fuel tank capacity: 12 gal (45.4 L)
Max fuel consumption: 3.8 gph (14.4 L/h)
Fuel type: Ultra-low sulfur diesel
Air cleaner: Dry-type, restriction indicator, evacuator valve, safety element
Oil filter: Spin-on
Recommended oil: 10W-30
Oil volume with filter: 8.5 qt (8 L)
Maximum angle of continuous operation: 35
Cooling medium: Water/Antifreeze
Coolant capacity (engine and radiator): 2.9 gal (10.9 L)
Alternator: 85A
Fan: 16.5 in (40.7 cm)
Clutch type: Electric clutch with brake

CUTTER WHEEL SYSTEM
Cutter wheel diameter without teeth: 23 in (58.4 cm)
Cutter wheel thickness: 1.1 in (2.7 cm)
Cutter wheel speed: 948 rpm
Cutter wheel straight line dimension: 65 in (165.1 cm)
Cutter wheel cut above ground: 27 in (68.6 cm)
Cutter wheel cut below ground: 16 in (40.6 cm)
Tooth description: Yellow Jacket cutter system
Number of teeth: 30
Number of indexes: 2
Number of pockets and reversible pockets: 30
Cutter wheel guard: Standard
Chip containment: 23 cu ft (.7 cu m)

CUTTER WHEEL DRIVE COMPONENTS
Upper gearbox: Straight bevel
Oil type: SAE 75W90 synthetic gear oil
Oil capacity: 1.7 qt (1.6 L)
Lower gearbox: Straight bevel
Oil type - lower gearbox: SAE 75W90 synthetic gear oil
Oil capacity - lower gearbox: 2.2 qt (2.1 L)
Driveshaft: 2 universal joints

HYDRAULIC SYSTEM
Tank capacity: 9.6 gal (36.3 L)
Recommended oil type: Vermeer Hypower 68
System type: Tandem gear pump, pressure balanced
Filtration method: Full-flow 4 micron return filter, suction strainer
Max pump flow: 9 gpm (34 L/min)
System relief pressure: 3000 PSI (20,684 kPa)
Flow control: Yes
Directional control: Yes

ELECTRICAL SYSTEM
System voltage: 12
Battery: 950 CCA
Indicator lights: Engine faults
Switches: Boom swing, boom height, creep propel, ignition, clutch, track gauge, track speed range, SmartSweep, throttle
Controller: Vermeer C248 with SmartSweep system
Display: Multifunction display (MFD) Displays: hours, fuel level, engine speed, engine faults and engine status
Shutdown system: High engine temperature and low oil pressure
Radio remote control: Optional, wireless

CHASSIS
Control station description: Swing-out
Operator vision shield description: Abrasion-resistant coated polycarbonate
Track brake type: Spring-applied and hydraulically released dual parking brakes

SHIPPING METHODS

Shipments of our products are made ALL OVER GREECE. Shipments are made via ELTA Door-to-Door or General Post. Shipping costs depend on total weight, package volume & destination. The cost calculation is done automatically when sending your order.
The minimum shipping cost is:
  • ELTA Door-Door: € 5.30 up to 5 kg and € 1 / kg for each additional kg.
  • General Post: € 6.50 up to 5 kg and € 1 / kg for each additional kg.
We also provide FREE SHIPPING FOR ORDERS> 300 € within Greece.
For more information please contact us, to offer you the cheapest possible solution.

PAYMENT METHODS

Payment upon delivery (COD)You pay upon delivery of the order at your place and pay the full amount in cash.

Payment by Credit, Debit or Prepaid Card

Online Secure Payments by debiting your Credit, Debit or Prepaid card (Visa, Mastercard, Maestro, Electro, American Express) through the secure environment provided by PIRAEUS BANK SA.. Your card will be charged upon registration of your order. Our system has taken all the necessary measures for the security of your transactions.

Payment by Deposit

You can deposit the amount of your order in one of the bank accounts of our company:

NATIONAL BANK ACCOUNT
A/L – 11200838875
IBAN – GR80 0110 1120 0000 1120 0838 875

PIRAEUS BANK ACCOUNT
A/L – 5149-079561-381
IBAN – GR26 0172 1490 0051 4907 9561 381

ALPHA BANK ACCOUNT
A/L – 178-00-2340014673
IBAN – GR58 0140 1780 1780 0234 0014 673

EUROBANK BANK ACCOUNT
A/L – 0026-0259-18-0201712846
IBAN – GR45 0260 2590 0001 8020 1712 846

Beneficiary: STAVROPOULOS THEMISTOKLIS

Write a review

Note: HTML is not translated!
Bad Good
We use cookies to improve your experience on our site. By browsing this site, you agree to the use of cookies. [View GDPR Privacy Policy Documents] . Read more