THE CENTRIFUGAL CLUTCH
engagement prevents belt slip when engaging
the clutch which means fewer maintenance costs
25HP (18.6 KW) EFI ENGINE performs well during cold-weather starts, reduces
occurrence of engine fl ooding and provides
improved fuel economy over comparable
carbureted gas engines.
THE LARGE INFEED OPENING 6" x 8" (15.2 cm x 20.3 cm) makes feeding irregular
material easier and decreases the amount of saw
cuts needed prior to feeding the chipper.
THE EXCLUSIVE SMARTFEED CONTROL SYSTEM
from Vermeer helps increase operator productivity
and reduces strain on vital engine parts, as engine
rpm is monitored and feed rollers are controlled.
ELECTRONICALLY SWITCHED BOTTOM FEED STOP BAR
is strategically located to make it possible for the
operator’s leg to strike the bar and shut off the
feed mechanism either intentionally or
automatically in an emergency situation
increasing operator safety while feeding material.
THE WIDE AXLE offers an ample footprint at the axle for
side-to-side stability; additionally enhances
transportability and visibility while backing up.
BC700XL BRUSH CHIPPER
GENERAL
Length (feed table up, tongue in): 113" (287 cm)
Length (feed table down, tongue extended): 133" (338 cm)
Width: 71" (180.3 cm)
Height: 102" (259.1 cm)
Weight: 1800 lb (816.5 kg)
ENGINE
Make and model: Kohler ECH740
Number of cylinders: 2
Gross horsepower (max): 25 hp (18.6 kW)
Torque (max): 41.7 ft-lb (56.5 Nm)
Fuel tank capacity: 6 gal (22.7 L)
Fuel type: Gasoline
Recommended oil: Kohler oil or API CH4/SJ
FEED SYSTEM
Feed roller dimension: 10" (25.4 cm)
Number of knives: 10
Feed speed: 49.4 ft/min
Infeed table width: 41.2" (104.6 cm)
Infeed Table Length : 30.2" (76.7 cm)
Infeed Throat Capacity: 6"x8" (15.2 cm x 20.3 cm)
SAFETY SYSTEM
Bottom feed stop bar: Standard
Reset method: Dual green hold-to-run buttons
Positions: Four position – e-stop, forward, stop, (reverse)
CUTTING SYSTEM
Material capacity: 6" (15.2 cm)
Width: 8" (20.3 cm)
Thickness: 1.25" (3.2 cm)
Diameter: 23.9" (60.7 cm)
Speed: 1748 rpm
Number of knives: 2
Useable edges: 2
DISCHARGE SYSTEM
Chute height: 97.16" (246.8 cm)
Chute rotation angle: 240˚
Rotation type: Manual
ELECTRICAL SYSTEM
System voltage: 12 Volt
Battery: Group 26, 400 CCA
Switches: Hold-to-run, sensitivity selector
CHASSIS
Hitch type: 2" (5.1 cm) ball coupler
Fender description: .1" (2.5 mm) steel bolt-on
Axle/Suspension: 2000 lb (907.2 kg) torsion axle
Capacity: 2000 lb (907.2 kg)
Tires: ST185/80D13 load range D
Wheels: 13 x 5, bolt circle 5 on 4.5
Axle/Suspension: 2000lb (907.2 kg) torsion axle
Brake type: Electric optional
Trailer light type: LED
OPTIONS
Extended warranty
Special paint
Planned maintenance
Vermeer Confi dence Plus® Asset Protection Program
