TENSION SCREEN DESIGN.
The tension screen
design allows the operator to
change screen
opening size, wire gauge and type of
wire to allow
for separating a wide variety of material.
Operators
can quickly change screen sizes by five
large bolts
adjusted by the tensioning hook.
ADVANCED CONTROLS. This machine features
a live time display remote.
Operator can adjust
drum speed, hopper feed,
conveyor feed and
height adjustments via the
transceiver remote.
ELECTRIC MOTOR. This machine is powered by
an industrial-duty,
fully enclosed and fan-cooled
electric motor. A
single 60-hp (44.7-kW) motor
powers the hydraulic
pump stack. The electric
motor has lower exhaust
emissions, jobsite noise
and maintenance
compared to diesel.
ACCESS TO CRITICAL POINTS. Perform
machine maintenance effi ciently
through ease of
access to components such
as motor, trommel
drum and drum drive.
GRIZZLY SCREEN OPTION. The optional grizzly
screen attaches onto
the hopper to help prescreen
large,
unwanted materials before entering the
hopper, resulting in a consistent fi nished
material.
TRAILER MOUNTED. Machine is mounted on a
trailer to
promote ease of mobility to and from
the
jobsite as well as on the job.
TR53000EM TROMMEL SCREEN
GENERAL
Weight: 32,000 lb (14,515 kg)
Hitch weight: 11,600 lb (5,261 kg)
Transport length: 39 ft (11.9 m)
Transport height: 13.4 ft (4.1 m)
Operation length: 89.9 ft (27.4 m)
Operation width: 9.5 ft (2.9 m)
Operation height: 15 ft (4.6 m)
Capacity: 100 cu yd (76.5 cu m) per hr with .5-in
(12.7-cm)
screens installed and material with moisture less than 40%
MOTOR OPTION
Make: Siemens
Spec: 480 VAC, 3 PHASE, 60 Hz
Motor rating: 60 hp (44.7 kW), 177 ft-lb (240 Nm) at 1,800 rpm
System voltage: 12 V
AC panel: 75 hp (55.9 kW), 480 VAC, SOFT START
HOPPER AND APRON CONVEYOR
Hopper capacity: 5.5 cu yd (4.2 cu m)
Hopper bottom width: 37 in (94 cm)
Hopper height: 9.5 ft (2.9 m)
Hopper opening: 34-in (86.4-cm) tall x 37-in (94-cm) wide
SCREEN DRUM
Drum operation: 0 gpm - 30.9 gpm (0 L/min - 117 L/min)
Drum diameter: 5 ft (1.5 m)
Drum speed: 0 rpm - 24 rpm
Drum length: 15 ft (4.6 m)
Maximum screen panels: 4
SCREEN BRUSHES
Bristle material: Polyethylene
Brush assembly support: Two 1.3 in (3.3 cm) sealed ball
bearings
FINES CONVEYOR
Fines conveyor length: 55 ft (16.8 m)
Conveyor belt width: 36 in (91.4 cm)
Conveyor belt type: 220 lb (99.8 kg), 2 ply, 3/16 in x 1/16 in
(.48 cm x .16 cm), R2 splice, continuous belt option
Conveyor belt stacking height: 15 ft (4.7 m)
OVERS CONVEYOR OPTION ONE
Overs conveyor length: 10.5 ft (3.2 m)
Conveyor belt size: 36 in (91.4 cm)
Conveyor belt type: 220 lb (99.8 kg), 2 ply, 3/16 in x 1/16 in
(.48 cm x .16 cm), R2 splice, continuous belt option
Conveyor belt stacking height: 7 ft (2.1 m)
OVERS CONVEYOR OPTION TWO
Overs conveyor length: 25 ft (7.6 m)
Conveyor belt size: 36 in (91.4 cm)
Conveyor belt type: 220 lb (99.8 kg), 2 ply, 3/16 in x 1/16 in
(.48 cm x .16 cm), R2 splice, continuous belt option
Conveyor belt stacking height: 13.8 ft (4.2 m)
