OPERATOR SAFETY.
Combined with the
patented bottom feed stop
bar is the four-position
upper feed control bar
with dual stop positions and
forward/reverse
feed positions. Mounted over the
feed table, it
enables the operator to stop the feed
rollers and
select forward or reverse operations.
Dual reset/hold-to-run buttons allow the operator
to readily reset the bottom feed stop bar.
ECOIDLE™ ENGINE CONTROL SYSTEM.
The EcoIdle engine control system can help
aid in
noise reduction, as well as help consumer
less fuel
if the feeding process has frequent
interruptions.
SMARTFEED. The patented SmartFeed system
helps increase
operator productivity while
reducing strain on
vital engine parts.
The feedsensing control
system monitors engine
rpm and automatically
stops and reverses the
feed roller when feeding
larger, hardwood material.
LARGE FEED OPENING.A large rectangular
12” x 17” (30.5 cm x 43.2 cm)
feed opening helps
boost productivity by reducing
the need to trim
material before feeding it into the
chipper.
EXTENDED WARRANTY.The 3-year/3000-hour
extended limited warranty
on drum housing, cutter
drum, shaft and hubs
offers peace of mind,
in addition to the
1-year/1000-hour Vermeer
equipment limited
warranty
CLUTCHLESS PTO.The throttle integrated with
the belt drive
engagement process helps ensure
that the PTO
can only be engaged while the engine
is at low
idle/low rpm. Automatically, the engine
throttles
up to full rpm after the belt drive is fully
engaged.
This system helps to reduce premature
wear to
the belt drive system by preventing high
idle
engagement of the cutter drum.
BC1000XL BRUSH CHIPPER
GENERAL
Length: 150" (381 cm)
Width: 66.5" (168.9 cm)
Height: 101" (256.5 cm)
Weight: 4995 lb (2265.7 kg)
ENGINE OPTION ONE
Make and model: Deutz D2.9L Tier 4 Final
Horsepower: 49 hp (36.5 kW)
Max torque: 108 ft-lb (146.2 Nm)
Fuel type: Diesel
Number of cylinders: 4
Cooling medium: Liquid
ENGINE OPTION TWO
Make and model: Deutz TD2.9L Tier 4 Final
Horsepower: 74 hp (55 kW)
Max torque: 181 ft-lb (245.4 Nm)
Fuel type: Diesel
Number of cylinders: 4
Cooling medium: Liquid
FEED SYSTEM
Chipping capacity (max): 12" (30.5 cm)
Infeed opening height: 12" (30.5 cm)
Infeed opening width: 17.5" (44.5 cm)
Feed roller orientation: Single horizontal
Feed table height: 26" (66 cm)
Feed speed (max): 122 fpm (37.2 m/min)
Feed roller dimensions: 20" x 17" (50.8 cm x 43.2 cm)
CUTTING SYSTEM
Drum dimensions: 22" diameter x 20" wide (55.9 cm x 50.8 cm)
Drum speed: 2126 rpm
Knives: Two A8 chipper steel reversible
Shear bar: Four usable edges
Engagement system: Clutchless belt drive PTO
CAPACITIES/ELECTRICAL
Fuel tank: 25 gal (94.6 L)
Hydraulic tank: 7 gal (26.5 L)
Hydraulic flow (max): 2.85 gpm (10.8 L/min)
Electrical: 12 Volt
Lights: LED stop, turn, tail, license
CHASIS/BRAKES
Frame: .25" x 7" (63.5 cm x 17.8 cm) Z channel
Tires: ST235/80/R16 load range E
Axle/Suspension: 5200 lb (2359 kg)/Torsion
Optional axle/suspension: 7000 lb (3175.1 kg)/Torsion
Electric brakes with breakaway switch
OPTIONS
Extended warranty
Special paint
Planned maintenance
Vermeer Confidence Plus® Asset Protection Program
Hydraulic surge brakes
Tree Comander™ remote control
