POWERFUL PERFORMANCE.
A 275 hp (205
kW) engine allows you to not only
meet emission
requirements but also enough
horsepower to meet
your jobsite needs.
SMART CRUSH. Once the upper feed roller
freely raises for four
seconds, it will automatically
increase down pressure
on the material being
fed. This allows the upper feed
roller to easily
climb onto large forked material before
the
increased down pressure is applied for maximum
pulling force.
LOWER FEED ROLLER. The lower feed roller
is offset from the upper feed
roller by 10.8"
(27.4 cm). Material is easily pulled to
the upper
feed roller, so there is less need to manually
raise
the upper feed roller for larger diameter material.
SMARTFEED. This patented system helps
increase operator
productivity while reducing
strain on vital engine parts.
The feedsensing
control system monitors engine rpm
and
automatically stops and reverses the feed roller
when feeding larger, hardwood material.
OPTIONAL REMOTE CONTROL. Operate one
machine to load while still maintaining
control of
the chipper. The remote control operates
forward,
reverse and stop functions of the feed
rollers,
restarting the feed rollers, engine throttle,
engine
stop, crush boost for the upper feed roller
and
hydraulic discharge chute positions (if equipped).
OPTIONAL WINCH. Eliminates the need to drag
large material to the
chipper. The 150' (45.7 m)
winch line can handle
material up to 4000 lb
(1814.9 kg), making it easy to
lift logs directly
onto the feed table. In addition the
winch
can also be hydraulically raised out
of the way
to allow operators to
feed the unit using a loader.
BC2100XL BRUSH CHIPPER
GENERAL
Operational length (tongue extended): 21.6' (6.6 m)
Width: 95.8" (243.2 cm)
Height (standard chute): 116.5" (295.9 cm)
Height (adjustable chute minimum): 110" (279.4 cm)
Height (adjustable chute maximum): 135.6" (344.4 cm)
ENGINE OPTION ONE (DOMESTIC)
Weight (without outriggers): 15,900 lb (7212.1 kg)
Weight (with outriggers): 16,200 lb (7348.1 kg)
Make and model: Tier 4 Final Stage IV Cummins QSB 6.7L
Horsepower: 275 hp (205.1 kW): 730 ft-lb (990 Nm)
Fuel type: Diesel
Number of cylinders: 6
Cooling medium: Liquid
ENGINE OPTION TWO (INTERNATIONAL)
Weight (with outriggers) engine: 15,000 lb (6803.9 kg)
Weight (without outriggers) engine: 14,700 lb (6667.8 kg)
Make and model: Tier 3 Cummins QSB 6.7L
Horsepower: 275 hp (205.1 kW): 730 ft-lb (990 Nm)
Fuel type: Diesel
Number of cylinders: 6
Cooling medium: Liquid
* EU Countries - Please check with your local Vermeer dealer
to confirm availability of
Tier 4i (Stage IIIB) Cummins QSB 6.7L engine option.
ELECTRICAL
System voltage: 12 V DC
CAPACITIES
Fuel tank: 65 gal (246.1 L)
Hydraulic tank: 24 gal (90.9 L)
CHASSIS
Frame: 2.5" x 8.75" (6.4 cm x 22.2 cm) C-channel
Tires: 235 / 75R17.5 load range H
Axle/Suspension: Dexter tandem torsion
Hitch: 3" (7.6 cm) pintle
CUTTING SYSTEM
Drum system: Spherical roller bearings
Drum speed: 1084 rpm
Drum-size opening: 21.5" x 28" (54.6 cm x 71.1 cm)
Knives: 4
FEED / DISCHARGE SYSTEM
Chipping capacity: 21" (53.3 cm)
Feed table height: 39" (99 cm)
Infeed opening height: 24" (61 cm)
Feed table length: 60.5" (153.7 cm)
Infeed opening width: 40" (101.6 cm)
Feed table width: 72" (182.9 cm)
Max feed speed: 100 ft/min (30.5 m/min)
Number of feed rollers: 2 horizontal
Discharge height: 116.5" (295 .9 cm)
Discharge chute rotation: 270°
Upper feed roller: 19" in diameter (48.3 cm)
Lower feed roller: 11" in diameter (28 cm)
OPTIONS
Special paint
Extended warranty
Preventive maintenance
Adjustable height discharge chute
Remote control
Hydraulic outriggers
Hydraulic chute controls
Confidence Plus
Planned maintenance
Winch
WARRANTY
3-year/3,000-hour extended limited warranty on
drum
housings, cutter drums, shaft, and ringfeeder hubs
1-year/1,000-hour Vermeer equipment limited warranty
