POWERFUL FEED ROLLER.
The feed roller is
equipped with aggressive teeth,
coupled with down
pressure, that provide pull in
power and maintain
control of the material being
fed to help get the job
done efficiently. The feed roller
drive planetary is
fully enclosed for protection from
debris and also
allows for a tight clearance between the
feed roller
and mill housing. This helps minimize material
blockage and reduces the power required to
feed material.
CAT ENGINE POWER. The 536 hp CAT C13B
engine provides the horsepower
needed for
processing difficult materials, while also
enabling
worldwide service and support for maximum
productivity.
DUPLEX DRUM. The patented Series III duplex
drum offers proven
cutting performance, and
reversible hammers and tips
that nearly double the
wear life of single-sided designs,
while easing daily
maintenance. The optional chip drum
produces a
consistent chip end-product, rather than
traditional
shredded material, for uses such as biofuel.
Plus, the drum has bolted-in components to help
efficiency
compared to welded systems and a
wedge design that holds
the hammers in place,
which can make it convenient to
service.
COMPLETE CONTROL. A state-of-the-art
wireless remote control unit allows the
operator to
run most machine functions from up to 300 ft
(91.4 m) away. This lets the operator, from the cab,
adjust
machine settings as the materials change,
including
control of the infeed settings, engine
droop, conveyor
height and more. Operators can
spend more time in the cab
throughout the day, and make machine adjustments
quickly.
CONTAMINATION DEFENSE.
The optional Vermeer-exclusive Damage Defense
system
helps reduce the likelihood of certain metal
contaminants
from entering the hammermill by
reversing the infeed
and turning off the feed system
when it senses the initial
metal contact. These metal
contaminants entering the
hammermill can damage
the machine, so the Damage
Defense system helps
keep the machine productive by
stopping certain
metal contaminants from being processed.
ANVIL. The anvil provides the cutting action
between the grinder
drum or chip drum, and
helps break apart the material.
The anvil mount
structure has been redesigned to handle
the high
horsepower. This redesign eases the replacement
process of the hard-faced wear edge, which
results in less
time required for maintenance.
HG4000 HORIZONTAL GRINDER (EU CONFIGURATION)
GENERAL WEIGHTS AND DIMENSIONS
Weight: 25.000 kg (55,155 lb) pintle hitch / 24.000 kg (52,910 lb)
fifth wheel hitch
Max transport length: 11.3 m (37 ft) pintle hitch / 9.7 m (32 ft)
fifth wheel hitch
Max transport width: 2.5 m (8.2 ft)
Max transport height: 4 m (13 ft)
ENGINE
Make and model: Caterpillar C13B T4F/STAGE V
Max gross horsepower: 400 kW (536 hp)
Fuel tank capacity: 757 L
INFEED CONVEYOR
Feed table width: 152,4 cm (60”)
Feed table length: 4,6 m (15’)
Loading height: 2,3 m (7.6’)
INFEED ROLLER
Max feed height: 106,7 cm (42”)
Diameter: 71 cm (28”)
DUPLEX DRUM OPTION
Millbox opening: 152,4 cm (60”) x 78,7 cm (31”)
Drum diameter: 57,2 cm (22,5”)
Number of hammers: 9
Number of tips: 18
CHIP DRUM OPTION
Millbox opening: 152,4 cm (60”) x 78,7 cm (31”)
Drum diameter: 69,3 cm (27,3”)
Depth of cut range: 3,2 mm (.125”) to 25,4 mm (1”)
Number of knives: 24
DISCHARGE SYSTEM
Length: 6,1 m (20’)
Width: 1,2 m (48”)
Belt design: 3-ply-330# with V-cleat
HYDRAULIC SYSTEM
Tank capacity: 29 L (7,7gal)
Implement pump type: Variable displacement, axial piston
Discharge conveyor pump: Fixed displacement gear pump
CONTROLS
Stationary: Side mounted multicolor touch screen
Remote: Multifunction with build in LCD
Remote range: Max. 91,4 m (300’)
OPTIONS
Vermeer Confidence Plus® asset protection program
Special paint
Air compressor
Screen hoist
Overband magnet
Creep drive
Damage Defense system
